- Wi-Fi 2.4 GHz
- Bluetooth
- Wi-Fi 2.4 GHz
- Bluetooth
Still comparing? Get what's new by email
New releases and the smart home news worth knowing, in your inbox.
No spam. Unsubscribe in one click.
| Feature | Beatbot Sora 10 | Beatbot Sora 30 | Winner |
|---|---|---|---|
| Price | $469.00 | $699.00 | Beatbot Sora 10 |
| Rating | 4.6 | 4.4 | Beatbot Sora 10 |
| Warranty | 2 years | 2 years | Tie |
| Pool Compatibility | In-Ground Pools, Above-Ground Pools | In-Ground Pools, Above-Ground Pools | Tie |
| Cleaning Coverage | Floor Cleaning, Wall Cleaning, Waterline Cleaning, Steps & Platform Cleaning | Floor Cleaning, Wall Cleaning, Waterline Cleaning, Steps & Platform Cleaning | Tie |
| Navigation | Ultrasonic Mapping, Obstacle Avoidance, Auto Parking | Ultrasonic Mapping, Obstacle Avoidance, Auto Parking | Tie |
| Cordless | YES | YES | Tie |
| Battery Life | 300 minutes | 300 minutes | Tie |
| Solar Charging | NO | NO | Tie |
| Connectivity | 2.4 GHz WiFi, Bluetooth | 2.4 GHz WiFi, Bluetooth | Tie |
What the differences mean
Brush system
The Beatbot Sora 30 carries four roller brushes in a dual-group layout, while the Beatbot Sora 10 uses dual front roller brushes. More rollers help along the walls and the waterline, but both machines rely on the same 6,800 GPH of suction to hold themselves against a vertical surface.
Navigation sensors
The Beatbot Sora 30 uses thirteen sensors in its SonicSense fusion and the Beatbot Sora 10 eleven. Both include an ultrasonic sensor for obstacle avoidance and both work in cloudy water, so the two extra sensors are a refinement rather than a change in how the robot navigates.
Recharge and weight
The Beatbot Sora 10 recharges in about 3.5 hours and weighs 8.5 kg, while the Beatbot Sora 30 takes about 4.5 hours and weighs 10.5 kg. Since a cordless pool robot comes out after every run, the lighter body and quicker top-up are the ones you notice most.
Battery capacity
The Beatbot Sora 30 carries a 10,000 mAh pack and the Beatbot Sora 10 a 7,800 mAh one, yet both are rated at 300 minutes. In practice the run time is the same, so the larger pack buys fewer charging cycles rather than a longer clean.
Positioning
The Beatbot Sora 10 is the more affordable of the pair. The Beatbot Sora 30 charges more for the extra brushes and sensors, without a change in suction, coverage or run time.
Which one to buy if
- you want the quicker turn-around between runs
The Beatbot Sora 10 recharges in about 3.5 hours against 4.5 for the Sora 30.
- you want the lighter robot to lift out of the pool
The Beatbot Sora 10 weighs about 8.5 kg against roughly 10.5 kg.
- you want the most brushes scrubbing the walls
The Beatbot Sora 30 runs four roller brushes against the dual front rollers of the Sora 10.
- you want the lower price of the two
The Beatbot Sora 10 is the more affordable robot and matches the Sora 30 on suction and run time.
- + Price: $469.00
- + Rating: 4.6
- - Price: $699.00 vs $469.00
- - Rating: 4.4 vs 4.6
Upgrading from the Beatbot Sora 10?
Moving up from the Beatbot Sora 10 to the Beatbot Sora 30 buys a denser brush set and a few more sensors rather than more cleaning power. Both are cordless robots rated at 6,800 GPH with a 300 minute battery, both cover floor, walls, waterline and shallow platforms, both park at the surface when they finish, and both navigate on SonicSense sensors with no camera and no smart home integrations. The Sora 30 adds four roller brushes instead of the Sora 10's dual front rollers, two more navigation sensors and a marginally larger basket, at the cost of a heavier body and a slower 4.5 hour recharge. If the Beatbot Sora 10 already keeps the pool clean and comes out easily, the step up changes little; if scrubbing along the walls is the weak point, the Sora 30 is the one to consider.
Frequently Asked Questions
Which is better overall: Beatbot Sora 10 or Beatbot Sora 30?
The Beatbot Sora 10 for most pools, since it matches the Beatbot Sora 30 on suction, coverage and run time while recharging faster, weighing less and costing less. The Sora 30 is the pick only if you want its four roller brushes and two extra sensors.
What is the biggest difference between the Beatbot Sora 10 and the Beatbot Sora 30?
The brush set and the sensors. The Beatbot Sora 30 runs four roller brushes and thirteen navigation sensors, against dual front rollers and eleven sensors on the Beatbot Sora 10, while both move the same 6,800 GPH for the same 300 minutes.
Do both clean the waterline and the shallow platforms?
Yes. The Beatbot Sora 10 and the Beatbot Sora 30 both cover the floor, walls, waterline and shallow platforms in one cycle, and both surface on their own when the cycle ends for easy retrieval. Neither skims the water surface.
Does either work with Alexa, Google Home or Matter?
Neither does. The Beatbot Sora 10 and the Beatbot Sora 30 have no smart home platform integrations, so scheduling and status live in the Beatbot app over Wi-Fi or Bluetooth while the robot is at the surface.
Who should buy the Beatbot Sora 10?
A large residential pool with heavy debris where a five litre basket, full four-zone coverage and the quicker recharge matter more than the last two sensors.
Who should buy the Beatbot Sora 30?
A buyer who wants the denser four-roller brush set and the extra navigation sensors, and does not mind the heavier body and slower recharge.
Our store on AmazonShop our ideas on AmazonLists of the smart home setups we would put together ourselves, ready to add to your Amazon cart.Shop on AmazonCompare all 23 Robotic Pool Cleaners side by side
You are looking at two of them. The full table lines up all Robotic Pool Cleaners in the catalog with the same specs, so you can filter by what you need and sort by price or rating.
- 23 Robotic Pool Cleaners
- 51 specs compared
- 47 filters
