Temperature & Humidity Sensors · Head to head

Shelly BLU H&T Display ZB vs Shelly BLU H&T ZB

Full Smart Temperature/Humidity Sensors comparison in 2026

Updated October 2026
Data from Amazon and official Shelly site.
2026 verdict
Two Shelly climate sensors, and the Shelly BLU H&T ZB is the pick for damp rooms, sheltered outdoor spots and fitting out several rooms at once.
Shelly BLU H&T ZB
Winner
Shelly BLU H&T ZB
$22.99

Last recorded price

Dropping the screen is what makes it a 37 mm, 13 gram square rated IP54 and able to run from -20 to 60 degrees Celsius, so it is the one of the pair that belongs in a bathroom, a garage or a covered balcony rather than on a shelf. It also runs on a single CR2032 rated for about three years, where the Shelly BLU H&T Display ZB uses two cells rated at around two. Both carry the same Bluetooth 5 LE and Zigbee 3.0 radios, both appear in Home Assistant through Zigbee2MQTT, and neither reaches Apple Home or Matter. The Shelly BLU H&T Display ZB wins on exactly one thing: its e-paper panel shows temperature, humidity, light level and a clock or date without opening an app. Choose the Shelly BLU H&T ZB when the number goes to a hub and the room gets damp, and the Shelly BLU H&T Display ZB when a person needs to read it on the wall.
vs
Deals by email

Temperature & Humidity Sensor prices change while you decide

We follow prices across the catalog and email you the best deals we find.

Smart home deals and news, straight to your inbox

Price drops, new releases and the smart home news worth knowing.

No spam. Unsubscribe in one click.

Your subscription could not be saved. Please try again.
Please enter a valid email address.
Tick the box above to finish signing up.
We couldn't verify you're human. Please try again.
Too many attempts. Please try again in an hour.
Your subscription has been successful.
FeatureShelly BLU H&T Display ZBShelly BLU H&T ZBWinner
Price$25.99$22.99Shelly BLU H&T ZB
Battery Life2 years3 yearsShelly BLU H&T ZB
ScreenYESNOShelly BLU H&T Display ZB
Rating4.44.4Tie
Warranty2 years2 yearsTie
ConnectivityBluetooth, ZigbeeBluetooth, ZigbeeTie
IntegrationsGoogle Home, Alexa, Samsung SmartThings, Home AssistantGoogle Home, Alexa, Samsung SmartThings, Home AssistantTie
SensorsTemperature, HumidityTemperature, HumidityTie
AlertsTemperature Alerts, Humidity AlertsTemperature Alerts, Humidity AlertsTie

What the differences mean

Display

The Shelly BLU H&T Display ZB carries a 65 mm e-paper panel showing temperature, humidity, a three-level light indicator, a clock or date and the battery state, while the Shelly BLU H&T ZB has no screen at all and only a red LED. If someone needs to read the numbers without a phone, only the Display model can be that.

Weather and range

The Shelly BLU H&T ZB is rated IP54 and specified from -20 to 60 degrees Celsius, so it is the one built for a bathroom, a garage or a sheltered balcony. The Shelly BLU H&T Display ZB carries no IP rating and is documented as indoor with a -10 to 40 degrees Celsius range, so keep it dry.

Battery

The Shelly BLU H&T ZB runs on a single CR2032 rated for about three years, where the Shelly BLU H&T Display ZB needs two CR2032 cells rated at around two, because the e-paper panel draws power every time the numbers change. The display-less model asks less of its battery.

Size and weight

The Shelly BLU H&T ZB is a 37 x 37 x 10 mm, 13 gram square that disappears almost anywhere, while the Shelly BLU H&T Display ZB is a 65 x 65 x 9 mm, 38 gram panel that needs a visible spot. One is for hiding, the other for showing.

Light sensor

Alongside temperature and humidity, the Shelly BLU H&T Display ZB also reports a coarse three-level light reading of dark, twilight and bright, which the Shelly BLU H&T ZB does not measure. That extra channel is only useful if a scene or a dashboard wants to know how dark the room is.

Which one to buy if

What owners say

Owners of the Shelly BLU H&T Display ZB describe a sensor that asks very little once it is on the network: pairing in minutes over either its Zigbee or its Bluetooth radio, immediate recognition in Home Assistant, and readings regular and precise enough to drive automations such as a bathroom exhaust fan. The 65 mm, 9 mm thick square gets mentioned almost as often, because the rear magnets, a stand and a light weight let it go anywhere without being noticed. They single out the display for showing light level and a clock beside the two readings, and value that the BLE Debug app can configure it without owning a gateway. Their warnings are the gateway requirement for the Shelly app and voice assistants, the lack of any Apple Home route, fiddly multi-press controls, a firmware update flow with no feedback, and vague documentation.

Price history compared

Every price change of both, in the same store, so the gap between the two lines is what one costs more than the other.

  • Shelly BLU H&T Display ZB
  • Shelly BLU H&T ZB

Loading price history...

Frequently Asked Questions

Which is better overall: Shelly BLU H&T ZB or Shelly BLU H&T Display ZB?

They measure the same two things, so it comes down to whether you want a screen. The Shelly BLU H&T ZB is cheaper, smaller, IP54 rated and lasts longer on one cell. The Shelly BLU H&T Display ZB is the one to buy when the temperature and humidity need to be readable on the wall as well as in a hub.

What is the biggest difference between the Shelly BLU H&T Display ZB and the Shelly BLU H&T ZB?

The display. The Shelly BLU H&T Display ZB has a 65 mm e-paper panel showing temperature, humidity, light level and a clock, while the Shelly BLU H&T ZB has none. The display-less model also adds an IP54 rating and a wider temperature range because there is no screen to protect.

Do the Shelly BLU H&T Display ZB and Shelly BLU H&T ZB need a hub?

Each needs one in some form. Over Zigbee both are end devices that join an existing coordinator, and Home Assistant reads them through Zigbee2MQTT. To appear in the Shelly Smart Control app, and therefore in Alexa, Google Home or SmartThings, both need a Shelly BLU Gateway or a Shelly Plus, Pro or Gen3 device on the network.

Can the Shelly BLU H&T ZB be used outdoors?

In a sheltered spot, yes. Shelly rates it IP54 against dust and splashes and points it at patios and balconies while advising against heavy rain, and its -20 to 60 degrees Celsius range covers cold garages and hot storage rooms. The Shelly BLU H&T Display ZB has no IP rating and is indoor only.

Do either of them work with Apple Home or Matter?

No. Both the Shelly BLU H&T Display ZB and the Shelly BLU H&T ZB carry only Bluetooth 5 LE and Zigbee 3.0, with no Matter certification and no Apple Home path. They reach Alexa, Google Home and SmartThings through the Shelly account, and Home Assistant over Zigbee.

Who should buy the Shelly BLU H&T Display ZB?

A Zigbee or Shelly household that wants the temperature, humidity and light level visible on the wall, with a clock, without picking up a phone, and is placing the sensor in a dry indoor room.

Who should buy the Shelly BLU H&T ZB?

Anyone monitoring a damp room or a sheltered outdoor spot who just needs the readings to reach a hub, especially when buying several sensors and wanting the smaller body and the longer battery life.

Full comparison table

Compare all 36 Temperature & Humidity Sensors side by side

You are looking at two of them. The full table lines up all Temperature & Humidity Sensors in the catalog with the same specs, so you can filter by what you need and sort by price or rating.

  • 36 Temperature & Humidity Sensors
  • 43 specs compared
  • 39 filters
Open the full comparison
More Temperature & Humidity Sensors

Top Temperature & Humidity Sensors to compare next

36 temperature and humidity sensors from 18 brands compared: Aqara, SwitchBot, Sonoff and more. Accuracy, display, battery life and protocols.

All Temperature & Humidity Sensors
Shelly

More Shelly products

A sharper look at other Shelly products worth comparing.

Explore Shelly
Price alert

Get an email when the price drops

How much should it drop?

Cancel anytime from the email.