Sonoff SwitchMan ZBM5 80 Type Review: A Zigbee Switch That Works With or Without a Neutral
The Sonoff SwitchMan ZBM5 80 Type is the 1-gang member of Sonoff's EU multi-gang switch family: a Zigbee 3.0 on/off switch on an 86 x 71 mm plate that fits European oval wall boxes. Its main draw is wiring flexibility, because it works with a neutral wire or without one (with a 3W minimum load in the no-neutral mode). It switches 100-240V loads up to 10A and reaches Alexa, Google Home and SmartThings through the eWeLink app and a Sonoff Zigbee gateway, Home Assistant through a ZBDongle, and Apple Home or Matter through a Sonoff Matter bridge. It does not dim, does not control fan speed and does not meter energy, and it always needs a Zigbee hub or dongle, so it suits a Zigbee home rather than someone who wants a stand-alone Wi-Fi switch.
- European oval multi-gang wall boxes
- Homes without a neutral wire at the switch
- Zigbee and Home Assistant setups
- Retrofitting an existing lighting circuit
Pros
- Zigbee 3.0 switch that works with a neutral wire or without one
- Fits European oval multi-gang boxes with an 86 x 71 mm 80-Type plate
- Switches 100-240V loads up to 10A and 2400W at 240V
- Acts as a Zigbee router when wired with a neutral
- Schedules, countdown timers, scenes and group control in the eWeLink app
- Works with Home Assistant through Zigbee2MQTT or ZHA and a ZBDongle
- Reaches Alexa, Google Home and SmartThings through an eWeLink account link
- 2-year warranty
Cons
- Needs a Zigbee hub or dongle to work
- On/off only, with no dimming
- No energy monitoring
- No traveler terminal, so multi-way control is not wired
- No-neutral mode needs a 3W minimum load and does not support smart bulbs or strips
- Cannot control a ceiling fan or other inductive loads
- Apple Home and Matter need a separate Sonoff Matter bridge
Who is the Sonoff SwitchMan ZBM5 80 Type for?
This is the 1-gang 80-Type switch of the ZBM5 line, sized at 86 x 71 x 40.3 mm for European oval multi-gang wall boxes; the 2-gang and 3-gang versions share the same family but are separate products. It replaces a single lighting circuit and is meant to sit next to other switches on a multi-gang plate. The reason to pick it over a plain Zigbee switch is the wiring: it can run with a neutral wire or without one, which matters in older European homes where the switch box has only live and the lamp wire. It is a good fit for a home that already runs Zigbee through a Sonoff gateway, iHost, NSPanel Pro or a ZBDongle, and it is especially interesting for Home Assistant users because Sonoff documents Zigbee2MQTT and ZHA support through its dongles.
What stands out on paper
The switch speaks Zigbee 3.0 and needs a Zigbee coordinator, either a Sonoff gateway such as the ZBBridge, ZBBridge Pro, ZBBridge Ultra or NSPanel Pro, an iHost, or a ZBDongle-E/P used with Zigbee2MQTT or ZHA. With a neutral wire it also acts as a Zigbee router, which helps extend the mesh. The relay is rated for 100-240V at 10A maximum resistive load, with a 3W minimum in no-neutral mode. Through the eWeLink app it offers schedules, countdown timers, recurring on and off loops, smart scenes and group control, plus a Power-on State setting on the hubs that support it. Sonoff also documents Detach Relay mode, which lets the app keep controlling smart lights while the physical switch is off, and that mode needs the neutral wiring. Voice and app control in Alexa, Google Home and SmartThings comes through an eWeLink account link, while Apple Home and Matter are reached through one of Sonoff's Matter bridges.
What to know before you buy
It is an on/off switch, not a dimmer, and it cannot regulate a ceiling fan or other inductive loads; the maker rates it for resistive lighting. There is no energy monitoring. Multi-way switching is not wired: the terminals are live, an optional neutral and the load output per gang, with no traveler terminal, so a second control point has to come from a scene or a remote. In no-neutral mode the minimum load is 3W and smart bulbs, dimmable lamps, light strips and lamps with built-in controllers are not supported; in that mode the switch is also a Zigbee end device rather than a router. Like every Zigbee wall switch here, it needs a hub or dongle, so the total cost includes one if the home does not already have it. The front is a rocker key, the network indicator is a small blue LED, and the switch carries a 2-year warranty.
Is the Sonoff SwitchMan ZBM5 80 Type worth it?
Its value depends on the wall box. If the switch sits in a European oval multi-gang box and the wiring has no neutral, this is one of the few Zigbee switches that can still work there, and the low 3W threshold covers most modern LED lamps. If a neutral is available, it adds mesh routing and fewer restrictions on the lamp. The case for it is strongest in a home that already runs a Sonoff gateway or Home Assistant with a Zigbee dongle, where it pairs quickly and adds schedules, scenes and voice control without a cloud-only Wi-Fi radio. If the plan needs dimming, fan speed, energy readings or a traveler wire for a second mechanical switch, this model is the wrong tool and a different switch in the catalog will fit better.
Frequently asked questions
Does the Sonoff SwitchMan ZBM5 80 Type need a hub?
Yes. It is a Zigbee 3.0 device, so it needs a Zigbee coordinator: a Sonoff gateway such as the ZBBridge, ZBBridge Pro, ZBBridge Ultra or NSPanel Pro, an iHost, or a ZBDongle-E/P used with Zigbee2MQTT or ZHA. It does not connect to Wi-Fi on its own.
Does the switch require a neutral wire?
No. It can be wired with a neutral or without one, and it detects the wiring mode when powered on. In no-neutral mode the minimum load is 3W and smart bulbs, dimmable lamps and light strips are not supported; with a neutral wire it also works as a Zigbee router.
Does it work with Apple Home, Google Home and Alexa?
Alexa, Google Home and SmartThings work through the eWeLink app and a Sonoff Zigbee gateway. Apple Home and Matter need one of Sonoff's Matter bridges, such as the eWeLink CUBE, because the switch itself is Zigbee rather than Matter.
Does the ZBM5 80 Type work with Home Assistant?
Yes. Sonoff documents Home Assistant support through Zigbee2MQTT or ZHA with a ZBDongle-E/P, and the iHost also runs it locally without a cloud account.
Can it dim lights or control a ceiling fan?
No. It is an on/off switch rated for resistive lighting loads, with no brightness control, no fan speed control and no fan light control.
Which wall box does the 80-Type fit?
It fits European oval multi-gang wall boxes and measures 86 x 71 x 40.3 mm. The 2-gang and 3-gang versions share the family plate but are separate products, while this item is the 1-gang model.



