Water Leak Sensor prices change while you decide
We check the price of every Water Leak Sensor in the catalog daily and email you the drops, whichever one you pick.
No spam. Unsubscribe in one click.
| Feature | Aqara Water Leak Sensor | Tapo T300 | Winner |
|---|---|---|---|
| Price | $18.99 | $16.99 | Tapo T300 |
| Rating | 4.2 | 4.6 | Tapo T300 |
| Battery Life | 2 years | 3 years | Tapo T300 |
| Integrations | Apple HomeKit, Samsung SmartThings, Home Assistant, Matter | Google Home, Home Assistant | Aqara Water Leak Sensor |
| On Device Alert Sound | NO | YES | Tapo T300 |
| On Device Alert Light | NO | YES | Tapo T300 |
| Warranty | 1 year | 1 year | Tie |
| Weather Resistance | IP67 | IP67 | Tie |
| Connectivity | Zigbee | Other | Tie |
| Sensors | Water Leak | Water Leak | Tie |
| Alerts | Water Leak Alerts, Low Battery Alerts | Water Leak Alerts, Low Battery Alerts | Tie |
What the differences mean
Alarm on the sensor
The Tapo T300 has a 90 dB siren and a light on the sensor itself, so anyone in the house hears a leak. The Aqara Water Leak Sensor has neither and relies on its hub and your phone to tell you.
Smart home platforms
The Tapo T300 works with Google Home, with only partial Home Assistant support. The Aqara Water Leak Sensor works with Home Assistant over Zigbee and reaches Apple Home, SmartThings and Matter through an Aqara hub, but not Google Home or Alexa.
Size
At 50 x 50 x 15 mm and 18 g, the Aqara Water Leak Sensor is a coin-sized puck that fits almost anywhere. The Tapo T300 is a longer 84.5 x 46.5 x 30 mm block, still small but less discreet.
Battery
The Tapo T300 is rated for 3 years on two AAAA cells and the Aqara Water Leak Sensor for 2 years on a CR2032. Neither is a chore, but the Tapo goes longer between swaps.
Which one to buy if
- you want a loud alarm right at the leak
The Tapo T300 sounds a 90 dB siren and flashes a light, while the Aqara Water Leak Sensor stays silent.
- your home runs on Apple Home
The Aqara Water Leak Sensor reaches Apple Home through an Aqara hub; the Tapo T300 does not support it at all.
- you use Google Home routines
The Tapo T300 works with Google Home, and the Aqara Water Leak Sensor does not.
- you run Home Assistant with a Zigbee stick
The Aqara Water Leak Sensor is a Zigbee device with full Home Assistant support, where the Tapo T300 is only partially supported.
- + Integrations: Apple HomeKit, Samsung SmartThings, Home Assistant, Matter
- - Price: $18.99 vs $16.99
- - Rating: 4.2 vs 4.6
- + Price: $16.99
- + Rating: 4.6
- + Battery Life: 3 years
- - Integrations: Google Home, Home Assistant vs Apple HomeKit, Samsung SmartThings, Home Assistant, Matter
What owners say
Owners of both sensors agree on the essentials: detection is quick, and the hub each one needs is the part people did not plan for. Beyond that they value different things. Aqara Water Leak Sensor owners single out the tiny size that slips under a sink, a CR2032 cell that lasts two years or more, and automations that shut off a pump or feed IFTTT; their complaints are uneven pairing on non-Aqara Zigbee hubs and a few seals that failed over time. Tapo T300 owners talk about a loud on-device alarm, alerts that caught leaks in progress and months without a dropout next to their other Tapo and Kasa devices, while their warnings are about sensor and hub models that do not match outside the US and a top drip probe small enough to miss an off-centre drop.
Price history compared
Every price change of both, in the same store, so the gap between the two lines is what one costs more than the other.
- Aqara Water Leak Sensor
- Tapo T300
Loading price history...
Frequently Asked Questions
Which is better overall: Aqara Water Leak Sensor or Tapo T300?
The Tapo T300 for most homes. It has a 90 dB siren and a light on the sensor, works with Google Home and runs longer on its batteries. The Aqara Water Leak Sensor is the better fit for Apple Home, Aqara and Zigbee setups.
What is the biggest difference between the Aqara Water Leak Sensor and the Tapo T300?
Where the alarm happens. The Tapo T300 sounds and flashes on the sensor itself, while the Aqara Water Leak Sensor has no siren or light and alerts only through its hub and your phone.
Does the Tapo T300 work with Home Assistant?
Only partially. The Tapo T300 connects to a Tapo hub over a Sub-1G radio, and Home Assistant support for it is partial. The Aqara Water Leak Sensor has full Home Assistant support as a Zigbee device.
Do the Aqara Water Leak Sensor and the Tapo T300 need a hub?
Yes, both do. The Aqara Water Leak Sensor needs a Zigbee hub, and an Aqara hub for Apple Home, SmartThings and Matter. The Tapo T300 needs a Tapo hub, since it has no Wi-Fi of its own.
Who should buy the Aqara Water Leak Sensor?
Apple Home, Aqara and Home Assistant users who want a tiny, discreet Zigbee sensor and are happy to get alerts through their hub rather than a siren on the device.
Who should buy the Tapo T300?
Tapo and Kasa households, and anyone on Google Home, who want a loud local alarm and a long battery life from a sensor tucked by the water heater or washing machine.
Compare all 33 Water Leak Sensors side by side
You are looking at two of them. The full table lines up all Water Leak Sensors in the catalog with the same specs, so you can filter by what you need and sort by price or rating.
- 33 Water Leak Sensors
- 36 specs compared
- 33 filters
