Water Leak Sensor prices change while you decide
We check the price of every Water Leak Sensor in the catalog daily and email you the drops, whichever one you pick.
No spam. Unsubscribe in one click.
| Feature | Fibaro Flood Sensor (Z-Wave) | Tapo T300 | Winner |
|---|---|---|---|
| Price | $61.36 | $16.99 | Tapo T300 |
| Rating | 4.3 | 4.6 | Tapo T300 |
| Battery Life | 2 years | 3 years | Tapo T300 |
| Sensors | Water Leak, Temperature, Tilt | Water Leak | Fibaro Flood Sensor (Z-Wave) |
| Alerts | Water Leak Alerts, Temperature Alerts, Freeze Temperature Alerts, Tamper Alerts | Water Leak Alerts, Low Battery Alerts | Fibaro Flood Sensor (Z-Wave) |
| Warranty | 1 year | 1 year | Tie |
| Connectivity | Z-Wave | Other | Tie |
| Integrations | Samsung SmartThings, Home Assistant | Google Home, Home Assistant | Tie |
| On Device Alert Sound | YES | YES | Tie |
| On Device Alert Light | YES | YES | Tie |
What the differences mean
What it senses
The Fibaro Flood Sensor (Z-Wave) adds a temperature sensor with general and freeze alerts, plus tilt sensing and tamper alerts. The Tapo T300 detects water only, so it will not warn you about a pipe about to freeze.
Hub and platforms
The Tapo T300 needs a Tapo Hub and works with Google Home, with partial Home Assistant support. The Fibaro Flood Sensor (Z-Wave) needs a Z-Wave controller and works with SmartThings and Home Assistant.
Battery and power
The Tapo T300 is rated for about 3 years on two AAA batteries and sends low battery alerts. The Fibaro Flood Sensor (Z-Wave) gets about 2 years from a CR123A but can be wired to 12/24V DC, keeping the battery as a backup.
Sealing
The Tapo T300 is sealed to IP67, so it can sit in a puddle. The weather resistance of the Fibaro Flood Sensor (Z-Wave) is not documented.
Which one to buy if
- you already run Tapo or Kasa devices
The Tapo T300 joins the Tapo Hub and app you already use.
- your smart home runs on Z-Wave or SmartThings
The Fibaro Flood Sensor (Z-Wave) is built for that network and works with SmartThings.
- pipes nearby could freeze
Only the Fibaro Flood Sensor (Z-Wave) senses temperature and sends freeze alerts.
- the sensor will sit directly in a wet spot
The Tapo T300 is IP67 sealed; the Fibaro's rating is not documented.
- + Sensors: Water Leak, Temperature, Tilt
- + Alerts: Water Leak Alerts, Temperature Alerts, Freeze Temperature Alerts, Tamper Alerts
- - Price: $61.36 vs $16.99
- - Rating: 4.3 vs 4.6
- + Price: $16.99
- + Rating: 4.6
- + Battery Life: 3 years
- - Sensors: Water Leak vs Water Leak, Temperature, Tilt
- - Alerts: Water Leak Alerts, Low Battery Alerts vs Water Leak Alerts, Temperature Alerts, Freeze Temperature Alerts, Tamper Alerts
What owners say
Owners of both say pairing is quick once the right hub is in place and that the local alarm does its job. Tapo T300 owners single out months of stable connection, a loud alarm with instant phone alerts and detection from both the top and the bottom of the unit, while complaining that the hub requirement was not obvious, that sensor and hub models can mismatch outside the US, and that the small top sensor can miss an off-centre drip. Fibaro Flood Sensor (Z-Wave) owners praise the temperature reading for freeze warnings, the tilt and tamper alerts and long battery life, though some found their hub misidentified it and a few received units with scratches or low batteries.
Price history compared
Every price change of both, in the same store, so the gap between the two lines is what one costs more than the other.
- Fibaro Flood Sensor (Z-Wave)
- Tapo T300
Loading price history...
Frequently Asked Questions
Which is better overall: Fibaro Flood Sensor (Z-Wave) or Tapo T300?
The Tapo T300 for most buyers: it is cheaper, better reviewed, IP67 sealed and lasts about 3 years per battery set. The Fibaro Flood Sensor (Z-Wave) is the better sensor if you want temperature, freeze, tilt and tamper alerts on a Z-Wave network.
Do they need a hub?
Yes, both. The Tapo T300 connects over a Sub-1GHz radio to a Tapo Hub sold separately, and the Fibaro Flood Sensor (Z-Wave) needs a Z-Wave controller.
Do both have an alarm on the sensor?
Yes. The Tapo T300 sounds a 90 dB alarm and lights up, and the Fibaro Flood Sensor (Z-Wave) also has its own alert sound and light.
Which smart home platforms do they support?
The Tapo T300 works with Google Home and partially with Home Assistant. The Fibaro Flood Sensor (Z-Wave) works with SmartThings and Home Assistant. Neither works with Apple Home or Matter.
Who should buy the Fibaro Flood Sensor (Z-Wave)?
Z-Wave and SmartThings users who want one compact sensor for leaks, temperature, freeze, tilt and tampering, with the option of wired DC power.
Who should buy the Tapo T300?
Tapo and Kasa households, or anyone willing to add a Tapo Hub, who want a loud, waterproof leak sensor that runs for years and works with Google Home.
Compare all 33 Water Leak Sensors side by side
You are looking at two of them. The full table lines up all Water Leak Sensors in the catalog with the same specs, so you can filter by what you need and sort by price or rating.
- 33 Water Leak Sensors
- 36 specs compared
- 33 filters
