Water Leak Sensor prices change while you decide
We check the price of every Water Leak Sensor in the catalog daily and email you the drops, whichever one you pick.
No spam. Unsubscribe in one click.
| Feature | Tapo T300 | Third Reality Water Leak Sensor | Winner |
|---|---|---|---|
| Price | $16.99 | $20.99 | Tapo T300 |
| Rating | 4.6 | 4.1 | Tapo T300 |
| Integrations | Google Home, Home Assistant | Google Home, Apple HomeKit, Samsung SmartThings, Home Assistant | Third Reality Water Leak Sensor |
| On Device Alert Light | YES | NO | Tapo T300 |
| Warranty | 1 year | 1 year | Tie |
| Battery Life | 3 years | 3 years | Tie |
| Connectivity | Other | Zigbee | Tie |
| Sensors | Water Leak | Water Leak | Tie |
| Alerts | Water Leak Alerts, Low Battery Alerts | Water Leak Alerts, Low Battery Alerts | Tie |
| On Device Alert Sound | YES | YES | Tie |
What the differences mean
Which hub it needs
The Tapo T300 talks to a Tapo Hub over a low-power radio. The Third Reality Water Leak Sensor is Zigbee, so it pairs with SmartThings, Home Assistant, Hubitat or the Third Reality bridge. The hub you already own decides most of this comparison.
Smart home platforms
The Tapo T300 works with Google Home, and partially with Home Assistant. The Third Reality Water Leak Sensor works with SmartThings and Home Assistant directly, and with Google Home and Apple Home through the Smart Bridge MZ1.
Local alert
Both sound an alarm on the sensor, but only the Tapo T300 also flashes a light, which helps when you cannot hear it or want to find which unit went off.
Water protection
The Tapo T300 is IP67, so it can sit in a puddle. Third Reality does not publish a rating for its sensor.
Which one to buy if
- you already own a Tapo Hub or Tapo cameras
The Tapo T300 joins that hub and reaches Google Home with nothing else to buy.
- you run SmartThings, Hubitat or Zigbee in Home Assistant
The Third Reality Water Leak Sensor pairs directly and is fully supported there.
- your home runs on Apple Home
The Third Reality reaches Apple Home through the Smart Bridge MZ1; the Tapo T300 has no Apple Home support.
- the sensor may end up sitting in water
The Tapo T300 carries an IP67 rating; the Third Reality has none published.
- + Price: $16.99
- + Rating: 4.6
- + On Device Alert Light: YES
- - Integrations: Google Home, Home Assistant vs Google Home, Apple HomeKit, Samsung SmartThings, Home Assistant
- + Integrations: Google Home, Apple HomeKit, Samsung SmartThings, Home Assistant
- - Price: $20.99 vs $16.99
- - Rating: 4.1 vs 4.6
What owners say
Owners of both put the loud on-device alarm near the top of their praise and describe sensors that catch leaks at water heaters, sinks and washers. Tapo T300 owners single out months of stable connection and how smoothly it joins their other Tapo and Kasa devices. Third Reality Water Leak Sensor owners single out pairing with Home Assistant and Hubitat by just pulling the battery tab, and running a dozen or more units for whole-house coverage. The complaints differ: Tapo owners mention a hub they did not know they needed, regional mismatches between sensor and hub outside the US and a small top drip sensor, while Third Reality owners mention raised sensing screws that shallow water may not reach and a few units going offline after a year.
Price history compared
Every price change of both, in the same store, so the gap between the two lines is what one costs more than the other.
- Tapo T300
- Third Reality Water Leak Sensor
Loading price history...
Frequently Asked Questions
Which is better overall: Tapo T300 or Third Reality Water Leak Sensor?
The Tapo T300, as a simple package with a siren and light, IP67 protection and Google Home support through the Tapo Hub. The Third Reality Water Leak Sensor is the better choice for a Zigbee hub or an Apple Home setup.
Is the Tapo T300 a good water leak sensor?
Owners of the Tapo T300 describe a loud, reliable alarm, quick setup in the Tapo app and months of stable connection. The complaints are about the Tapo Hub it requires, regional hub mismatches outside the US and a small top drip sensor.
Do both need a hub?
Yes. The Tapo T300 needs a Tapo Hub, and the Third Reality Water Leak Sensor needs a Zigbee hub such as SmartThings, Home Assistant or Hubitat. Neither connects to Wi-Fi on its own.
Which one works with Apple Home?
Only the Third Reality Water Leak Sensor, through the Smart Bridge MZ1. The Tapo T300 works with Google Home but not Alexa, Apple Home, SmartThings or Matter.
Who should buy the Tapo T300?
Tapo and Kasa households with a Tapo Hub that want a waterproof leak sensor with a siren, a light and Google Home alerts.
Who should buy the Third Reality Water Leak Sensor?
SmartThings, Hubitat and Home Assistant users who want a loud Zigbee leak alarm they can deploy in many spots.
Compare all 33 Water Leak Sensors side by side
You are looking at two of them. The full table lines up all Water Leak Sensors in the catalog with the same specs, so you can filter by what you need and sort by price or rating.
- 33 Water Leak Sensors
- 36 specs compared
- 33 filters
