Shelly Neo Smart Water Valve Review: An Inline Brass Valve With Ultrasonic Water Sensing
The Shelly Neo Smart Water Valve is a premium inline shutoff for a 1-inch main line, built around an NSF-certified brass body and ultrasonic sensing instead of a mechanical flow meter. It reports flow rate, pressure and water temperature, closes in about 12 seconds, and offers local control through its web interface, MQTT, REST and webhooks. The main trade-offs are that it needs mains power, automatic leak shutoff depends on separate Flood sensors, and it is designed for cold water only.
- Whole-home leak protection
- Home Assistant and MQTT users
- Homes with a 1-inch main line
- Drinking-water plumbing
Pros
- Inline 1-inch brass valve certified for drinking water (NSF)
- Ultrasonic sensing of flow, pressure and water temperature with no moving parts
- Local control through the built-in web interface, MQTT, REST, webhooks and UDP, with no hub
- Works with Google Home, Amazon Alexa, Samsung SmartThings and Home Assistant
- IPX7 protection and a fast 12-second open or close
Cons
- Requires mains power from the included adapter, with no battery backup
- Automatic leak shutoff needs separate wireless Shelly Flood Gen4 sensors
- No documented micro-leak pressure test or scheduled valve exercise
- Cold-water use only
- Premium price for an inline valve that also needs professional installation
Who is the Shelly Neo Smart Water Valve for?
This is an inline valve for a home with a 1-inch main cold-water line, installed by a plumber in place of a section of pipe rather than clamped onto an existing handle. It suits a household that wants both remote shutoff and continuous water monitoring, and especially one already running Home Assistant, MQTT or a Shelly installation, since the valve speaks those protocols locally. It is not a fit for hot-water lines, and it is more hardware than a home that only wants a motorized handle on an existing valve.
What stands out on paper
The body is NSF-certified brass for drinking-water systems and carries an IPX7 rating. Inside, ultrasonic sensors measure flow, pressure and water temperature with no moving parts: flow-volume resolution is 0.1 gal (0.38 L), pressure accuracy is plus or minus 1 kPa across 0 to 200 psi, and water temperature is read from -10 to 65 degrees Celsius within plus or minus 0.5 degrees. The valve takes about 12 seconds to open or close, connects over 2.4 GHz or 5 GHz Wi-Fi and Bluetooth 5.0, and needs no hub. Local access runs through the built-in web interface plus MQTT, REST, webhooks and UDP, and the device is listed for Google Home, Amazon Alexa, Samsung SmartThings and Home Assistant.
What to know before you buy
The valve is powered from a DC 5 V / 2 A adapter and has no internal battery or maker-sold backup, so a power cut stops it until power returns. Automatic leak shutoff is not built in: it works by pairing the valve with separate Shelly Flood Gen4 sensors and a Shelly automation, and there is no wired probe input. Shelly does not document a pressure-drop micro-leak test or a scheduled valve exercise cycle, and the flow reading resets below its measurement threshold, so very small drips are not caught from flow alone. The North American package ships with 1-inch NPT fittings, while the valve body uses a G1-1/4 BSPP thread and a DN25 (G1 R) adapter, so the plumbing connection should be confirmed before ordering. It is cold-water only.
Is the Shelly Neo Smart Water Valve worth it?
It earns its premium price when a household wants an inline, drinking-water-safe valve that also acts as a water meter and a local smart-home device, with no cloud dependency for basic control. If the goal is only automatic shutoff from leak sensors, a retrofit actuator on the existing handle costs far less and needs no plumbing work. The case for this valve is the combination: whole-home shutoff, ultrasonic consumption and pressure data, IPX7 protection and local integrations in one installed unit.
Frequently asked questions
Does the Shelly Neo Smart Water Valve need a hub?
No. It connects over 2.4 GHz or 5 GHz Wi-Fi and Bluetooth 5.0, and it also offers a local web interface plus MQTT, REST, webhooks and UDP access.
Does it work with Home Assistant, Alexa, Google Home or SmartThings?
Yes. The valve is listed for Home Assistant, Google Home, Amazon Alexa and Samsung SmartThings.
Does it close automatically when it detects a leak?
It closes when a paired Shelly Flood Gen4 sensor reports water, through a Shelly automation. It has no wired leak probe, and the flow sensor is for monitoring and alerts rather than a documented automatic shutoff on its own.
What pipe size does it fit?
The North American version ships with 1-inch NPT brass fittings, and the valve body has a G1-1/4 BSPP thread with a DN25 (G1 R) adapter included. It targets a 1-inch main line.
Can it keep working during a power outage?
No. It runs from a DC 5 V / 2 A adapter and has no internal battery or maker-sold backup. Shelly notes it can be powered from a 5 V power bank, but that is a user-supplied option.
Does it require a subscription?
No. Its app, alert and local control features are not tied to a paid plan.





